From dc1261d703ae1e1a14841b030888e3f87ff7c38f Mon Sep 17 00:00:00 2001 From: Christian Cleberg Date: Wed, 1 May 2024 21:45:52 -0500 Subject: prettier formatting and rewrap lines --- content/blog/2022-09-21-graphene-os.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'content/blog/2022-09-21-graphene-os.md') diff --git a/content/blog/2022-09-21-graphene-os.md b/content/blog/2022-09-21-graphene-os.md index 6c427b2..97a9c10 100644 --- a/content/blog/2022-09-21-graphene-os.md +++ b/content/blog/2022-09-21-graphene-os.md @@ -92,9 +92,9 @@ To start, enable developer mode by going to `Settings` > `About` and tapping `Build Number` seven (7) times. You may need to enter your PIN to enable this mode. -Once developer mode is enabled, go to `Settings` > `System` > `Devloper -Options` and enable OEM Unlocking, as well as USB or Wireless Debugging. In my -case, I chose USB Debugging and performed all actions via USB cable. +Once developer mode is enabled, go to `Settings` > `System` > `Devloper Options` +and enable OEM Unlocking, as well as USB or Wireless Debugging. In my case, I +chose USB Debugging and performed all actions via USB cable. Once these options are enabled, plug the phone into the computer and execute the following command: @@ -104,8 +104,8 @@ adb devices ``` If an unauthorized error occurs, make sure the USB mode on the phone is changed -from charging to something like "File Transfer" or "PTP." You can find the -USB mode in the notification tray. +from charging to something like "File Transfer" or "PTP." You can find the USB +mode in the notification tray. ## Reboot Device -- cgit v1.2.3-70-g09d2