From a807aed5c389d1dfadcd5c88b79c48469aa5b9d9 Mon Sep 17 00:00:00 2001 From: Christian Cleberg Date: Mon, 8 Jul 2024 20:31:42 -0500 Subject: fix images for 2023 and 2024 posts --- content/blog/2023-06-18-unifi-ip-blocklist.md | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'content/blog/2023-06-18-unifi-ip-blocklist.md') diff --git a/content/blog/2023-06-18-unifi-ip-blocklist.md b/content/blog/2023-06-18-unifi-ip-blocklist.md index 9e8a860..5861054 100644 --- a/content/blog/2023-06-18-unifi-ip-blocklist.md +++ b/content/blog/2023-06-18-unifi-ip-blocklist.md @@ -27,15 +27,10 @@ blocked yet. # Create an IP Group Profile -To start, login to the Unifi machine's web GUI and navigate to the Network app - -> Settings > Profiles. +To start, login to the Unifi machine's web GUI and navigate to the Network app > Settings > Profiles. Within this page, choose the `IP Groups` tab and click `Create New`. -![Network -Profiles](https://img.cleberg.net/blog/20230618-unifi-ip-blocklist/unifi_profiles.png) - Each IP Group profile can be used as one of three options: 1. Port Group @@ -46,9 +41,6 @@ In this example, I'm creating an IPv4 Address/Subnet group and adding a few different IP addresses and a subnet. Once you've added all IP addresses and subnets, click the `Apply` button that should appear at the bottom. -![Network Profile -IPs](https://img.cleberg.net/blog/20230618-unifi-ip-blocklist/abusive_ips.png) - At this point, the IPv4 Address/Subnet has been created but not yet used. # Drop IP Group Profile via the Unifi Firewall @@ -69,9 +61,6 @@ entry should contain the following settings: Customize the remaining configurations to your liking, and then save and enable the firewall rule. -![Firewall -Rule](https://img.cleberg.net/blog/20230618-unifi-ip-blocklist/firewall_drop_rule.png) - Once enabled, the Unifi machine will be able to drop all incoming connections from the defined IP addresses and subnets within the created profile. -- cgit v1.2.3-70-g09d2